Working principle
The parking system is 4 or more rows design. The structure is divided into lifting channel and parking area. Every floor has an empty car space. A comb type lifter is set in the lifting channel. The cars will be parked on the sliding comb frame. The entrances are located in the ground floor of each lifting channel. Cars will be transported to the aim position through the exchanging between comb lifter and sliding comb frame when saving or retrieving the cars.
Characteristics
1) Scope of application: Outdoor high level parking system, narrow parking area which needs to set the entrance at side and multi form combinatorial parking system
2) Drive mode: Hydraulic pulley driven by large drive ratio. The hydraulic system adopts pump group pumping station. Every pump can become the backup of other pumps. It is low noise, high working and safety.
3) Sliding system: Adapt to self-driving sliding comb frame driven by double transmission shaft and patent sliding power supply technology. Safe and stable.
4) Layouts: ground layout and half ground half under underground layout.
5) Entrance: ground floor of every lifting channel.
5) Entrance observation mirror, voice prompts, LED display are equipped.
6) Able to be equipped with electric car charging devices.
Parameters
Car size(L×W×H) | ≤5.3m×1.9m×1.55m |
≤5.3m×1.9m×2.05m |
Car weight | ≤2350kg |
Motor power & speed | Lift | 15-22kw Hydraulic speed-regulation 28-42m/min |
Slide | 0.2kw 9.5m/min |
Operation mode | IC card/ key board/ manual |
Access mode | Forward in, forward out |
Power supply | 3 phase 5 wires 380V 50Hz |