PCS II - Cabinet type vertical lifting parking system (10 floors)


Updated :2018/06/15
  • Working principle

    The shape of this parking system is rectangle. The structure is divided into the tunnel and the parking area. The tunnel is the lifting channel. It has the function of lifter, turntable, layer levelness system and carrier. The parking are is set on both side of the tunnel parallel. 4-12 parking spaces can be set on each floor. One or more entrances can be set on the ground floor. The entrance can also be set on the lifting platform. When saving or retrieving the cars, the carrier will carry the cars between the entrance, tunnel and the parking area. The action of lifting, sliding, turning will be finished by the lifter at the same time.


    1) Scope of application: Outdoor multi-level parking system and indoor concrete type well type parking system.

    2) Drive mode: Hydraulic pulley driven by large drive ratio. The hydraulic system adopts pump group pumping station. Every pump can become the backup of other pumps. It is low noise, high working and safety.

    3) Car exchanging: comb type carrier or tire gripping carrier.

    4)Layouts: ground layout, half ground half under underground layout and underground layout.

    5) Entrance observation mirror, voice prompts, LED display are equipped.



    Drive modehydraulic & wire rope
    Car size(L×W×H)≤5.3m×1.9m×1.55m
    Car weight≤2350kg
    Motor power & speedOperation modeLift30kw Max 45m/min
    Slide2.2kw Max 30m/min
    Turn2.2kw 3.0rpm
    Carry1.5kw 40m/min
    Access modeIC card/ key board/ manual
    Power supplyForward in, forward out
    Car weight3 phase 5 wires 380V 50Hz
  • 20180702134703216.jpg