PCS I - Circular type vertical lifting parking system (10 floors)

PRODUCTS

Updated :2019/03/19
Previous:There's no more content
  • Working principle

    The shape of the parking system is cylinder or multi prism. The structure can be divided into inner cylinder and outer cylinder. The inner cylinder is the lifting channel which consists of lifter, turntable, layer levelness system and carrier. The outer cylinder is the parking area which is under radiate arrangement. 6-12 car spaces can be set at each floor.


    Characteristics

    1) Scope of application: Outdoor multi-level parking system and indoor concrete type well type parking system.

    2) Drive mode: Hydraulic pulley driven by large drive ratio. The hydraulic system adopts pump group pumping station. Every pump can become the backup of other pumps. It is low noise, high working and safety.

    3) Car exchanging: comb type carrier or tire gripping carrier.

    4) Layouts: ground layout, half ground half under underground layout and underground layout.

    5) Entrance observation mirror, voice prompts, LED display are equipped.

     

    Parameters

     

    Drive modehydraulic & wire rope
    Car size(L×W×H)≤5.3m×1.9m×1.55m
    ≤5.3m×1.9m×2.05m
    Car weight≤2350kg
    Motor power & speedLift30kw Max 45m/min
    Turn2.2kw 3.0rpm
    Carry1.5kw 40m/min
    Operation modeIC card/ key board/ manual
    Access modeForward in, forward out
    Power supply3 phase 5 wires 380V 50Hz
  • 20180615170425450.jpg

    20180615170425305.jpg

    20180615170425603.jpg